Catalogue

Formerly Birchley Products, manufacturer Underwater Equipment

Hydrostatic Test Systems: Hydrostatic Pressure Automatic Cut-off: HY-PAC

Hydrostatic Pressure Automatic Cut-off

To meet the control device requirements of standards such as BS EN ISO 18119 Octopus Test Systems developed HY-PAC (Hydrostatic Pressure Automatic Cut-off).

HY-PAC features a contact gauge to be fitted into the hydrostatic pressure circuit and a control box with solenoid valve fitted into the low pressure hydro pump air supply.

The contact gauge is set to the desired over pressure prior to testing.

If during testing an over-pressure situation occurs the contact gauge will trip sending a signal to the control box which in turn closes the solenoid valve which isolates the LP air supply so stopping the hydropump from increasing the pressure any further.

The system also provides a significant advantage over conventional mechanical relief valves where the over pressure setting can be adjusted in seconds which is of particular benefit when dealing with multiple test pressures.

Hydrostatic test systems HY-PAC
Hydrostatic test systems proof method
Hydrostatic test systems HY-PAC
Hydrostatic test systems HY-PAC

 

Part Number Description
CU01-S-001 HY-PAC System, Control Box + Gauge + PS (UK Electrical Supply)
CU01-S-002 HY-PAC System, Control Box + Gauge + PS (Euro Electrical Supply)
CU01-A-0005 Hose, HY-PAC to Hydropump, 8 bar Max WP, (Length up to 0.4m)
CU01-A-0006 Hose, Air Supply to HY-PAC, 8 bar Max WP, (Length 1.0 to 2.0m)
CU01-C-0003 Elbow, Swivel, 90deg, HY-PAC